Publications

Book Chapter

F. Hu, M. Sharifi, G. R. Palmese, “Influence of Furanyl Building Blocks on the Cure Kinetics of a Renewable Epoxy-Amine System”, Green Polymer Chemistry III: Biobased Materials and Biocatalysis, 2015, Chapter 23, pp 387–399,10.1021/bk-2015-1192.ch023.


Peer-Reviewed Journal Papers

C. Jang, M. Sharifi, G. R. Palmese and C. F. Abrams, “Toughness Enhancement of Thermosetting Polymers using a Novel Partially Reacted Substructure Curing Protocol: A Combined Molecular Simulation and Experimental Study”, Manuscript submitted to Polymer.

M. Sharifi, K.A. Ghorpade, V.I. Raman, G.R. Palmese, “Structural Analysis of Porous Epoxy Polymers via Swelling Behavior and Glass Transition Temperature”, Manuscript submitted to Polymer.

M. Sharifi, C. W. Jang, C. Abrams and G. R. Palmese, “Epoxy Polymer Networks with Improved Thermal and Mechanical Properties via Controlled Dispersion of Reactive Toughening Agents”, Macromolecules, 2015, in press.

M. Sharifi, C. W. Jang, C. Abrams and G. R. Palmese, “Toughened Epoxy Polymers via Rearrangement of Network Topology”, Journal of Materials Chemistry A, 2014, 2, 16071-16082.

C. Jang, M. Sharifi, G. R. Palmese and C. F. Abrams, “Crosslink Network Rearrangement via Reactive Encapsulation of Solvent in Epoxy Curing: A Combined Molecular Simulation and Experimental Study”, Polymer, 2014, 55, 3859-3868.

N. Sharifi and M. Sharifi, “Reducing Energy Consumption of Steam Ejectors through Experimental Optimization of Nozzle Geometry”, Energy, 2014, 66, 860-867.

S. Hooshmand Zaferani, M. Sharifi, D. Zaarei and M. R. Shishesaz, “Application of Eco-Friendly Products as Corrosion Inhibitors for Metals in Acid Pickling Processes–A Review”, Journal of Environmental Chemical Engineering, 2013, 1, 652-657.

P. A. Pratama, M. Sharifi, A. M. Peterson and G. R. Palmese, “Room Temperature Self-Healing Thermoset Based on the Diels–Alder Reaction”, ACS applied materials & interfaces, 2013, 5, 12425-12431.

N. Sharifi, M. Boroomand and M. Sharifi, “Numerical Assessment of Steam Nucleation on Thermodynamic Performance of Steam Ejectors”, Applied Thermal Engineering, 2013, 52, 449-459.

B. Rajput, M. Sharifi, H. V. Pol, M. K. Patra, S. R. Vadera, P. M. Singru and N. N. Ghosh, “Preparation of Flexible Magnetic Nanocomposites of Linear Low-Density Polyethylene-Polybenzoxazine-Magnetic Nanoparticles and Their Mechanical and Magnetic Properties”, J. Nanosci. Lett., 2013, 26.


Conference Proceedings

C. Jang, M. Sharifi, G. R. Palmese and C. F. Abrams, “Partially Reacted Substractures Method for Thermoset Epoxies Studied Using Molecular Dynamics Simulations”, Proc. American Society for Composites, 2015.

M. Sharifi, B. Z. Haque, J. W. Gillespie and G. R. Palmese, “Rate Dependent Mechanical Behavior of Polymer Network Isomers with Controlled Topology”, Proc. SAMPE, 2015.

M. Sharifi and G. R. Palmese, “Toughened Epoxy Polymers via Incorporation of Partially-Reacted Substructures”, Proc. Adhesion Society, 2015.

C. Jang, M. Sharifi, G. R. Palmese and C. F. Abrams, “Molecular Dynamics Simulation Study of Reactive Encapsulation of Solvent in Epoxy Curing”, Proc. American Society for Composites, 2014.

N. Sharifi and M. Sharifi, “Numerical Investigation of Heat Transfer in Wet Steam Flow in Convergent-Divergent Nozzles”, Proc. ASME. 56352; Volume 8B, IMECE2013-62406, 2013.

N. Sharifi and M. Sharifi, “CFD Evaluation of Steam Properties Within Thermo-Compressors With Two Different Numerical Approches”, Proc. ASME. 56321; Volume 7B, IMECE2013-64672, 2013.

N. Sharifi and M. Sharifi, “Experimental Improvement of Ejector Performance Through Numerical Optimization of Nozzle Geometry”, Proc. ASME. 56321; Volume 7B, IMECE2013-62031, 2013.

N. Sharifi, M. Boroomand and M. Sharifi, “Numerical Investigation of the Effects of Steam Nucleation on Steam Ejectors Performance”, Proc. ASME. 45233; Volume 7, 331-339, IMECE2012-85576, 2012.

N. Sharifi, M. Boroomand and M. Sharifi, “Numerical Optimization of Ejector Geometry Based on Non-Dimensional Parameters”, Proc. ASME. 45233; Volume 7, 125-133, IMECE2012-86837, 2012.